Pier & Beam House Leveling
In The RGV.
Action House Leveling specializes in pier & beam house leveling in the Rio Grande Valley. Synchronized hydraulic lift, sill & beam replacement, and permanent steel shimming for older crawlspace homes across Mercedes, McAllen, Harlingen, and Brownsville.
Why pier & beam homes need leveling.
Pier & beam homes across the Rio Grande Valley sit on wood sills, beams, and concrete or block piers above a crawlspace. RGV humidity rots the sills, expansive clay settles the piers, and decades of compression crushes the original wood shims. The structure tilts, floors slope, and doors stop closing. Pier & beam house leveling restores the home to true elevation and locks it there — permanently.
Lifetime Warranty
Pier, sill, beam, and shim work backed by a transferable lifetime warranty.
Treated Lumber & Steel
Failed wood shims replaced with galvanized steel; rotted sills replaced with pressure-treated lumber.
Laser-Verified Lift
Hydraulic recovery monitored to 1/16-inch precision. Floors return to true.
Does your pier & beam home need leveling?
Pier & beam homes shift slowly — and then all at once. If you see any of these signs in your RGV home, schedule a free pier & beam house leveling inspection.
- Sloping or sagging floors across rooms
- Bouncy or springy spots underfoot
- Doors and windows that stick or won't latch
- Visible gaps where walls meet floors
- Rotted or crushed wood shims in the crawlspace
- Beams or sills with visible sag, rot, or termite damage
Our pier & beam
leveling method.
Elevation Survey
Digital manometer maps the floor across every room. We see exactly how the house has moved before we lift.
Crawlspace Inspection
Every sill, beam, joist, pier and shim assessed for rot, crush, settlement, or pest damage.
Synchronized Lift
Hydraulic bottle jacks placed at engineered points rise together in 1/8-inch increments — gentle on plaster, drywall, and trim.
Permanent Stabilization
Rotted sills replaced with treated lumber, sagging beams sistered or replaced, piers stabilized on concrete pads, final elevation locked with steel shims.
Methods we use for pier & beam leveling.
Pier-and-beam leveling is a coordinated set of techniques chosen to match how far your home has moved and what's holding it up. Here's our toolkit on every RGV crawlspace leveling job.
Synchronized Hydraulic Jacking
Bottle jacks placed at engineered points lift the structure together in fractions of an inch — gentle on plaster, drywall, and trim.
New Concrete Pier Pads
Where original piers have crumbled, settled, or leaned, we pour new engineered concrete pier pads sized to your home's load points.
Permanent Steel Shimming
Galvanized steel shims set the final elevation between beam and pier. They don't rot, crush, or migrate over time.
Sill Plate Replacement
Rotted sills cut out and replaced with pressure-treated lumber — the structural member your entire wall sits on.
Beam Sistering & Reinforcement
Sagging beams reinforced with sister beams or replaced outright with properly sized, treated lumber spanning the full run.
Crawlspace Moisture Control
Vapor barriers and improved drainage stop the chronic ground moisture that caused the rot — so the leveling lasts.
Pier & beam house leveling across the entire RGV.
Headquartered in Mercedes, TX. Crews dispatched daily across Hidalgo, Cameron, and Willacy counties — serving every city in the Rio Grande Valley.
Alamo, Combes, Granjeno, Hidalgo, La Feria, La Villa, Los Fresnos, Lyford, Port Isabel, Primera, Progreso, Rancho Viejo, Rio Hondo, Santa Rosa, Sebastian.
Other house leveling services.
Pier & beam leveling is one branch of our full house leveling program. If you own a mobile or manufactured home, see our mobile home leveling service. To repair the underlying foundation members, see pier & beam foundation repair.